Custom Nickel Plated Steel Strip | Corrosion‑Resistant Strip for Battery Tabs, Connectors & Hardware

Custom Nickel Plated Steel Strip

서론

1. Nickel Plated Steel Strip is a low‑carbon or alloy steel strip with a continuous nickel coating applied by electroplating. The steel core provides good mechanical strength, stiffness and formability, while the nickel layer offers improved corrosion resistance, oxidation resistance and stable electrical contact performance. Thanks to its good spot‑weldability and solderability, nickel plated steel strip is widely used in battery tabs for cylindrical and prismatic cells, electrical connectors and terminals, clips and springs, and precision metal stampings in the electronics and hardware industries.

2. We supply fully customizable Nickel Plated Steel Strip, including base steel grade, strip thickness, width, hardness, and nickel coating thickness according to your requirements. Material can be delivered in coils or cut‑to‑length strips, with controlled surface finish suitable for stamping, bending and progressive die forming in automated production. Consistent nickel plating thickness ensures reliable welding performance and long‑term corrosion protection. OEM/ODM service and engineering support are available to match your drawings, processing conditions and application standards for batteries, electrical components and metal hardware.

   사양

   유형	Nickel Plated Steel Strip / Coil / Ribbon / Electro‑Nickel Coated Steel
   Structure	Low‑carbon or alloy steel strip with a continuous nickel coating applied by electroplating; nickel layer firmly bonded to the steel substrate
   Material Grade (Steel)	Typically mild / low‑carbon steels and cold‑rolled strip steels (e.g., DC01, SPCEN, SAE 1006–1010, equivalent EN/ASTM grades); other steel grades on request
   Nickel Layer	Pure nickel deposit, usually ≥ 99% Ni; thickness controlled according to customer requirement and relevant standards
   Ni Coating Thickness	Customizable (e.g., ~0.5–10 µm typical, heavier coatings available); optimized for corrosion resistance, weldability, and electrical contact
   Electrical & Thermal	Steel core provides mechanical strength; nickel surface offers stable electrical contact and improved corrosion/oxidation resistance; suitable for spot‑welding, resistance welding, and soldering
   양식	Strip / coil / ribbon; supplied as continuous coils or cut‑to‑length strips; suitable for stamping, bending, and forming
   두께 범위	Total strip thickness typically from about 0.1 mm to 1.5–2.0 mm (thicker on request), including steel base plus nickel coating
   Width & Length	Strip width from a few millimeters up to ~300–600 mm (depending on thickness and grade); supplied in coils (tens to hundreds of meters) or fixed cut lengths
   Surface Finish	Bright, matte, or semi‑bright nickel finish; controlled roughness for good welding, soldering, and plating adhesion; normally oiled or dry, as specified
   Mechanical Properties	Mechanical strength and formability determined mainly by steel grade and temper; available in soft, half‑hard, or hard conditions for stamping and spring applications
   Corrosion Performance	Nickel coating significantly improves resistance to atmospheric corrosion and oxidation compared with bare steel; suitable for indoor and many mildly aggressive environments (additional top coatings possible if required)
   Weldability & Joining	Good suitability for spot welding and resistance welding (common in battery tabs and terminals); compatible with soldering and mechanical fastening
   Dimensional Tolerances	Tight control of thickness, width, and flatness according to EN/ASTM/GB strip standards to ensure stable feeding in high‑speed stamping and automatic assembly
   Standards & Reference	Manufactured with reference to relevant steel strip standards (e.g., EN 10130 / ASTM A1008 for base steel) and electroplated coating standards (e.g., ISO/ASTM for nickel coatings on steel)
   Application Range	Battery tabs and holders (Ni‑MH, Ni‑Cd, some Li‑ion), electrical connectors and terminals, contact springs, clamps, clips, metal stampings, hardware parts, decorative and functional components
   Processing Capability	Suitable for slitting, shearing, precision stamping, progressive die forming, bending, embossing, and punching; optimized for high‑volume automated production lines
   Customization	Tailored steel grade, temper, thickness, width, nickel coating thickness, coil ID/OD, surface finish, and pre‑cut or pre‑stamped geometries according to drawings or CAD files
   Packaging	Supplied in strapped coils or bundled strips with edge protection; anti‑corrosion paper/film wrapping and wooden pallets or wooden cases available for safe storage and long‑distance transport

참조 치수