Custom Titanium Mesh Electrode
Introducción
- This pure titanium mesh electrode is made from high‑quality Grade 1 or Grade 2 titanium, offering excellent corrosion resistance, low weight, and good mechanical strength. The open mesh structure provides a large effective surface area and smooth electrolyte flow, making it suitable for use as either anode or cathode in electrolysis, electroplating/electropolishing, electrochemical filtration, seawater and wastewater treatment, and various laboratory electrochemical cells. In many systems it can be used directly as an inert support or current collector for other active coatings or materials.
-
All key parameters can be customized, including titanium grade and thickness, mesh opening size and pattern, overall dimensions, and edge treatment (framed, welded, flattened, or cut to shape). The mesh can be supplied as flat sheets, rolls, discs, or special‑shaped electrodes according to drawings. Optional welding tabs, busbars, mounting holes and assemblies are available to match your reactor design and power connection requirements, making this pure Ti mesh electrode a flexible solution for both R&D and industrial applications.
Especificaciones
| Tipo | Titanium mesh electrode |
| Material Grade | Gr1 / Gr2 / Gr7 / Gr9 titanium, other grades on request |
| Pureza | ≥99.99% |
| Formulario | Expanded mesh, perforated mesh, woven wire mesh; supplied as flat sheet, panel, or roll |
| Espesor | Mesh thickness or wire diameter customizable (typ. 0.1–1.0 mm), as per request |
| Mesh Size & Shape | Mesh opening size, strand width, and pattern fully customizable; rectangle, square, round, ring, plate, and special-shaped as per drawing |
| Surface Finish | Pickled, sandblasted, brushed, polished, or as‑rolled surface, depending on application |
| Surface Treatment / Coating | Bare titanium, MMO‑coated (Ru–Ir, Ir–Ta, etc.), platinum‑coated, mixed noble metal oxide or other catalytic coatings as per electrochemical requirements |
| Hole / Slot / Mesh Design | Can be made with different mesh patterns, hole sizes, slot designs, and flow‑through structures to optimize current distribution and mass transfer |
| Corrosion Resistance | Outstanding corrosion resistance in seawater, chloride media, many acids/alkalis, and electrochemical environments (especially with MMO/Pt coatings) |
| Mechanical Strength | High specific strength, good toughness and fatigue resistance, with sufficient rigidity for framed or unsupported mesh electrodes |
| Operating Temperature | Typically up to 260–300 ℃ in most coated applications; higher limits depending on coating system and environment |
| Surface Flatness | Low overpotential and high current efficiency when coated; stable potential and long service life under continuous operation |
| Application Range | Widely used in chlor‑alkali cells, sodium hypochlorite and ozone generators, cathodic protection, electro‑winning, electroplating/electropolishing, wastewater and seawater treatment, electrochemical disinfection, fuel cells, and various lab & pilot electrolysis systems |
| Customization | Logo, marking, frame welding, tabs and busbars, edge treatment, mesh pattern, coating type and loading, and complete electrode assemblies can all be customized according to drawings or samples |
Dimensiones de referencia
| 0.1mm*5mm*10mm | 0.2mm*5mm*10mm | 0.1mm*10mm*20mm |
| 0.2mm*20mm*20mm | 0.3mm*20mm*30mm | 0.1mm*20mm*50mm |
| 0.2mm*30mm*100mm | 0.1to 0.5mm*50mm*50mm | El tamaño se puede personalizar. |
To customize various metal electrodes, please click the picture below for details：
 |
 |
 |
 |
 |
 |
 |
 |
