Espuma de grafeno 3D com espessura de 1,2 mm a 1,6 mm Aceita personalização
Introdução
The 3D Graphene Foam is made via chemical vapor deposition (CVD) processing. In course of CVD fabrication of graphene hydrogen and methane gases are introduced into a furnace that heats to 1000° Celsius. In the furnace is a nickel or copper film which captures a mono or multi-layer or graphene as the furnace is heated and the methane decomposes.
Advantages
- It has good conductivity and is an excellent light porous conductive carrier.
- On this substrate, we can grow a variety of oxide and hydroxide nanoarrays such as nickel oxide, cobalt oxide, cobalt trioxide, ferric oxide, cobalt hydroxide, nickel hydroxide, tungsten oxide, vanadium oxide, titanium oxide and so on.
Especificações
| Sample size | 100*100mm （can be customized） |
| Espessura | 1.2 mm-1.6mm |
| Densidade | 4 mg/cm3 |
| Pore Size | 580 microns |
| Packing | in sealed membrane box |
| Densidade superficial | 0.5-0.9 mg/cm2. |
| Size of branches | 50-200 microns |
| Characteristic of large aperture | 200-500 microns. |
| Thermal conductivity | ＞6w/(m2k) |
| Standard PPI value | 110 |
Dimensões
| 0,1 mm*200 mm*300 mm | 0,2 mm*200 mm*300 mm | 0,3 mm*200 mm*300 mm |
| 0,4 mm*200 mm*300 mm | 0,5 mm*200 mm*300 mm | 0,6 mm*200 mm*300 mm |
| 0,7 mm*200 mm*300 mm | 0,8 mm*200 mm*300 mm | 0,9 mm*200 mm*300 mm |
| 1 mm*200 mm*300 mm | 1.6mm*20mm*300mm | O tamanho pode ser personalizado |
Para personalizar várias espumas metálicas, clique na imagem abaixo para obter mais detalhes:
