Custom Titanium Mesh Electrode
서론
- This iridium coated titanium nail electrode is designed as a compact, high‑stability anode for electrolysis, electrochemical research, small‑scale reactors, and laboratory test cells. The titanium substrate (e.g. Grade 1 / Grade 2) offers excellent corrosion resistance and mechanical strength, while the iridium‑based MMO catalytic coating provides low chlorine/oxygen evolution overpotential, high current efficiency, and long service life in harsh electrolytes, including acidic and chloride‑containing solutions. Its nail / pin shape allows easy insertion into small cells, tubular reactors, and custom jigs where conventional plate or mesh electrodes are difficult to install.
-
All key parameters can be customized, including titanium grade, nail length and diameter, head shape, coating type (Ir or Ir–Ta MMO) and loading, as well as connection style (threaded end, welded lead, lug, or bare shank). The electrode can be supplied as a single nail or as an array mounted on a custom holder to match your reactor design. This Ir–Ti nail electrode is suitable for use in laboratory experiments, pilot equipment, and special electrochemical devices requiring a compact, durable, and highly active anode.
사양
| 유형 | Titanium mesh electrode |
| Material Grade | Gr1 / Gr2 / Gr7 / Gr9 titanium, other grades on request |
| 순수함 | ≥99.99% |
| 양식 | Expanded mesh, perforated mesh, woven wire mesh; supplied as flat sheet, panel, or roll |
| 두께 | Mesh thickness or wire diameter customizable (typ. 0.1–1.0 mm), as per request |
| Mesh Size & Shape | Mesh opening size, strand width, and pattern fully customizable; rectangle, square, round, ring, plate, and special-shaped as per drawing |
| Surface Finish | Pickled, sandblasted, brushed, polished, or as‑rolled surface, depending on application |
| Surface Treatment / Coating | Bare titanium, MMO‑coated (Ru–Ir, Ir–Ta, etc.), platinum‑coated, mixed noble metal oxide or other catalytic coatings as per electrochemical requirements |
| Hole / Slot / Mesh Design | Can be made with different mesh patterns, hole sizes, slot designs, and flow‑through structures to optimize current distribution and mass transfer |
| Corrosion Resistance | Outstanding corrosion resistance in seawater, chloride media, many acids/alkalis, and electrochemical environments (especially with MMO/Pt coatings) |
| Mechanical Strength | High specific strength, good toughness and fatigue resistance, with sufficient rigidity for framed or unsupported mesh electrodes |
| Operating Temperature | Typically up to 260–300 ℃ in most coated applications; higher limits depending on coating system and environment |
| Surface Flatness | Low overpotential and high current efficiency when coated; stable potential and long service life under continuous operation |
| Application Range | Widely used in chlor‑alkali cells, sodium hypochlorite and ozone generators, cathodic protection, electro‑winning, electroplating/electropolishing, wastewater and seawater treatment, electrochemical disinfection, fuel cells, and various lab & pilot electrolysis systems |
| Customization | Logo, marking, frame welding, tabs and busbars, edge treatment, mesh pattern, coating type and loading, and complete electrode assemblies can all be customized according to drawings or samples |
참조 치수
| 0.1mm*5mm*10mm | 0.2mm*5mm*10mm | 0.1mm*10mm*20mm |
| 0.2mm*20mm*20mm | 0.3mm*20mm*30mm | 0.1mm*20mm*50mm |
| 0.2mm*30mm*100mm | 0.1to 0.5mm*50mm*50mm | 크기는 맞춤 제작이 가능합니다. |
To customize various metal electrodes, please click the picture below for details：
 |
 |
 |
 |
 |
 |
 |
 |
